Il y a beaucoup de gans ambitieux dansn l'Industrie IT. Pour monter à une autre hauteur dans la carrière, et être plus proche du pic de l'Industrie IT. On peut choisir le test Microsoft 070-291 à se preuver. Mais le taux du succès et bien bas. Participer le test Microsoft 070-291 est un choix intelligent. Dans l'Industrie IT de plus en plus intense, on doit trouver une façon à s'améliorer. Vous pouvez chercher plusieurs façons à vous aider pour réussir le test.
Aujoud'hui, dans cette indutrie IT de plus en plus concurrentiel, le Certificat de Microsoft 070-536 peut bien prouver que vous avez une bonne concurrence et une space professionnelle plus grande à atteindre. Dans le site Pass4Test, vous pouvez trouver un outil de se former très pratique. Nos IT experts vous offrent les Q&As précises et détaillées pour faciliter votre cours de préparer le test Microsoft 070-536 qui vous amenera le succès du test Microsoft 070-536, au lieu de traivailler avec peine et sans résultat.
Le Pass4Test est un site qui peut offrir les facilités aux candidats et aider les candidats à réaliser leurs rêve. Si vous êtes souci de votre test Certification, Pass4Test peut vous rendre heureux. La haute précision et la grande couverture de la Q&A de Pass4Test vous aidera pendant la préparation de test. Vous n'aurez aucune raison de regretter parce que Pass4Test réalisera votre rêve.
Avec la version plus nouvelle de Q&A Microsoft 070-291, réussir le test Microsoft 070-291 n'est plus un rêve très loin pour vous. Pass4Test peut vous aider à réaliser ce rêve. Le test simualtion de Pass4Test est bien proche du test réel. Vous aurez l'assurance à réussir le test avec le guide de Pass4Test. Voilà, le succès est juste près de vous.
Code d'Examen: 070-291
Nom d'Examen: Microsoft (Implementing, Managing, and Maintaining a Microsoft Windows Server 2003 Network Infrastructure)
Questions et réponses: 260 Q&As
Code d'Examen: 070-536
Nom d'Examen: Microsoft (TS:MS.NET Framework 2.0-Application Develop Foundation)
Questions et réponses: 155 Q&As
Code d'Examen: MB7-839
Nom d'Examen: Microsoft (NAV 2009 Core Setup and Finance)
Questions et réponses: 93 Q&As
Choisir le Pass4Test vous permet non seulement à réussir le test Microsoft 070-536, mais encore à enjouir le service en ligne 24h et la mise à jour gratuite pendant un an. Nous allons lancer au premier temps la Q&A Microsoft 070-536 plus nouvelle. Si vous ne passez pas le test, votre argent sera tout rendu.
070-291 Démo gratuit à télécharger: http://www.pass4test.fr/070-291.html
NO.1 You are a network administrator for A.Datum Corporation.The network consists of a single Active
Directory domain named adatum.net.
Users regularly browse the internal network and the Internet from their client computers.All Web and
e-mail hosting for a separate DNS domain named adatum.com is outsourced to an ISP.All name
resolution requests for adatum.com are resolved by the ISP.You have no administrative control over the
DNS servers at the ISP.You
cannot list the contents of adatum.com by using the nslookup command on the DNS servers at the ISP.
A Windows Server 2003 computer named Server1 is configured with a primary zone for adatum.net.All
root hints have been removed from Server1. All client computers refer to this DNS server for name
resolution.
You need to configure DNS resolution to ensure that all client computers can locate and access resources
in adatum.net, adatum.com, and the Internet.
What should you do?
A.Configure a secondary zone for adatum.com on Server1.
B.Configure a primary zone for adatum.com on Server1.
C.Configure conditional forwarding for adatum.com with the IP address of the DNS server at the ISP.
D.Configure simple forwarding with the default settings with the IP address of the DNS server at the ISP.
Answer: D
Microsoft examen 070-291 070-291 examen 070-291 examen
NO.2 131.107.11.0/23
NO.3 You are the network administrator for your company.The network consists of a single Active Directory
domain.The functional level of the domain is Windows Server 2003. All client computers in the domain run
Windows XP Professional.
An application named Inventory.exe is installed on all computers in the domain to remotely gather
software inventory information.The application runs as a service in the security context of the Local
System.The startup type of the service is set to Automatic.
In the Default Domain Policy Group Policy object (GPO), the security administrator has configured a
software restriction policy that is applied to all computers in the domain.The policy contains a hash rule for
the
Inventory.exe application, and the hash rule is configured with a security level of Unrestricted.
The client computers on the network are attacked by a worm that is distributed by e-mail messages
received over the Internet.The worm detects the presence of Inventory.exe on a computer, then starts a
new instance of the application in the security context of the logged-on user.The worm exploits a bug in
the application to cause the
computer to fail.
You need to ensure that Inventory.exe cannot be started by the worm, while still allowing the application to
run as a service.
What should you do?
A.In the computer settings section of the Default Domain Policy GPO, configure a software restriction
policy that contains a zone rule for the Internet zone.Configure the zone rule with a security level of
Disallowed.
B.In the user settings section of the Default Domain Policy GPO, configure a software restriction policy
that contains a zone rule for the Internet zone.Configure the zone rule with a security level of Disallowed.
C.In the user settings section of the Default Domain Policy GPO, configure a software restriction policy
that
contains a hash rule for the Inventory.exe application.Configure the hash rule with a security level of
Disallowed.
D.In the computer settings section of the Default Domain Policy GPO, modify the existing software
restriction policy hash rule for the Inventory.exe application so that the hash rule has a security level of
Disallowed.
Answer: D
Microsoft examen certification 070-291 070-291 certification 070-291
NO.4 Drag drop
You are the network administrator for a Web hosting company.All servers run Windows Server 2003. All
client computers run Windows XP Professional.
Your company is assigned the following IP address ranges by the ISP:
>131.107.10.0 through 131.107.10.255
>131.107.11.0 through 131.107.11.255
The company's data center contains 400 Windows Server 2003 computers and consists of two subnets
named subnet A and subnet B.Subnet A contains 200 servers and uses the 131.107.10.0 network
address.Subnet B also contains 200 servers and uses the 131.107.11.0 network address.All server IP
addresses are assigned by DHCP.All computers in the data center have valid Internet-accessible IP
addresses.
As a result of a corporate acquisition, 200 additional servers will be added to your company's data center
within one month.The new servers will be placed on the network segment that maps to subnet A.The
existing router does not have the capacity for an additional subnet, and the budget does not allow the
purchase of a new router.You will
need to add the additional servers to the existing subnet A.The ISP assigns you the additional IP address
range 131.107.12.0 through 131.107.12.255.
You need to change the IP addressing scheme to accommodate all required servers in subnet A and
subnet B.You are authorized to make any necessary changes.
The diagram in the work area shows the network configuration and the planned number of servers for
each subnet.
Which IP address should be assigned to each subnet?
To answer, drag the appropriate IP address or addresses to the correct locations in the work area.
IP address IP Addresses
1> 131.107.10.0/23
NO.5 You are the administrator of a Windows Server 2003 computer named Server1. Server1 has a
third-party application installed on it.The third-party application runs as a service that is named Service1.
Service1 fails periodically.
You need to configure the recovery options for Service1 to meet the following requirements:
If Service1 runs successfully for a day or more, you need to ensure that only the service is immediately
restarted upon failure.
If, after this failure, Service1 does not run successfully for another day, you must ensure the entire server
is immediately restarted.
Which three actions should you perform? (Each correct answer presents part of the solution.Choose
three.)
A.Configure the Reset fail count after value for Service1 to 1 day.
B.Configure the Restart service after value for Service1 to 1,440 minutes.
C.Configure the response to the first failure to be to restart Service1.
D.Configure the response to the first failure to be to restart Server1.
E.Configure the response to the second failure to be to restart Service1.
F.Configure the response to the second failure to be to restart Server1.
Answer: FCA
certification Microsoft 070-291 examen 070-291 certification 070-291
NO.6 131.107.12.0/24
Answer
:
2.You are the network administrator for your company.All servers run Windows Server 2003. All servers
are configured with static IP addresses.All client computers run Windows XP Professional.All client
computers are configured as DHCP clients.
The company has a main office and one branch office.The offices are separated by a router.A DHCP
server is deployed in each office.
One of the DHCP servers shuts down unexpectedly.It takes four hours to repair the server.During that
time, several mobile users connect their portable computers to the network and report that they cannot
connect to shared resources on the network.
After the server is repaired, you create a new scope on each DHCP server that includes IP addresses for
the other office.You activate the scopes.
You test the new DHCP configuration by shutting down the DHCP server in the main office.You find out
that the client computers in the main office are not receiving IP addresses from the DHCP server in the
branch office. You need to ensure that when the DHCP server in one office fails, the client computers will
receive a correct IP
address configuration from the DHCP server in the other office.
What are two possible ways to achieve this goal? (Each correct answer presents a complete
solution.Choose two.)
A.Configure the router between the offices to forward BOOTP broadcasts.
B.Configure the DHCP server in each office with a DHCP scope that includes the same IP addresses as
the DHCP server in the other office.Activate the scope.
C.Configure the DHCP server in each office with an additional network adapter.Connect each new
network adapter to the local network.Assign an IP address from the other office's network to each new
network adapter.
D.Install and configure a DHCP relay agent in each office.
Answer: DA
certification Microsoft certification 070-291 certification 070-291
3.You are the network administrator for your company.The network consists of a single Active Directory
domain.All servers run Windows Server 2003.
The network contains a Web server named Server1 that runs IIS 6.0 and hosts a secure Web site.The
Web site is accessible from the intranet, as well as from the Internet.All users must authenticate when
they connect to Server1.
All users on the Internet must use a secure protocol to connect to the Web site.Users on the intranet do
not need to use a secure protocol.
You need verify that all users are using a secure protocol to connect to Server1 from the Internet.
What are two possible ways to achieve this goal? (Each correct answer presents a complete
solution.Choose two.)
A.Monitor the events in the application log on Server1.
B.Monitor the events in the security log on Server1.
C.Monitor the Web server connections on Server1 by using a performance log.
D.Monitor network traffic to Server1 by using Network Monitor.
E.Monitor the IIS logs on Server1.
Answer: ED
Microsoft examen certification 070-291 certification 070-291 070-291 examen certification 070-291 070-291 examen
4.You are the administrator of an Active Directory domain.All servers run Windows Server 2003. All client
computers run Windows XP Professional.All computers are members of the domain.
The Secure Server (Require Security) IPSec policy is assigned to a file server named Server6. The policy
is configured as shown in the exhibit.(Click the Exhibit button.)
Users report that they cannot access shared folders on Server6. Users were able to access shared
folders on
Server6 prior to the implementation of the IPSec policy.
You need to ensure that all client computers in the domain can access the shared folders on Server6. You
must ensure that all communications between client computers and Server6 be encrypted.
What should you do?
A.On Server6, enable the All ICMP Traffic IP Security rule in the properties of the Secure Server (Require
Security) IPSec policy.
B.On Server6, enable the <Dynamic> IP Security rule in the properties of the Secure Server (Require
Security)
IPSec policy.
C.On all client computers, assign the Client (Respond Only) IPSec policy.
D.On all client computers, install an IPSec communication certificate in the local machine store.
Answer: C
certification Microsoft 070-291 070-291 examen certification 070-291 certification 070-291
5.You are a network administrator for your company.The network consists of a single Active Directory
domain.All servers run Windows Server 2003.
The company has a main office and one branch office.The perimeter networks for each office are
configured as shown in the exhibit.(Click the Exhibit button.)
You configure an L2TP/IPSec VPN tunnel between Server1 and Server2. You also configure and assign
an IPSec
policy named RASIPSec that requires secure communications.
You need to ensure that no unsecured traffic from the Internet reaches the internal network through this
VPN.You
also need to ensure that access to the VPN servers from their respective internal networks is not
disrupted. What should you do?
A.Configure input and output L2TP/IPSec packet filters on the internal interfaces of Server1 and Server2.
B.Configure input and output L2TP/IPSec packet filters on the external interfaces of Server1 and Server2.
C.In the properties of RASIPSec, edit the All IP Traffic IP Filter list to include the IP addresses for only
Server1 and Server2.
D.In the properties of RASIPSec, edit the All ICMP Traffic IP Filter list to include the IP addresses for only
Server1 and Server2.
Answer: B
certification Microsoft certification 070-291 certification 070-291 070-291 examen
6.You are the administrator of an Active Directory domain.The network contains a Windows Server 2003
domain controller named Server1.
Users report that they experience intermittent delays when they log on to Server1. Administrators report
that replication attempts between Server1 and other domain controllers are occasionally delayed.
You need to verify the cause of the intermittent connection delays to Server1. You also need to find out
whether the problem is related to a hardware deficiency on Server1. You need to track these delays over
a period of one day.
What should you do first?
A.Run the netdiag /verbose command to perform a network diagnostic test on Server1.
B.Run the replmon command to view the Active Directory replication status on Server1.
C.Use Network Monitor to view the network traffic packet contents between Server1 and all other
computers.
D.Create a System Monitor counter to track the queue lengths on the network adapter on Server1.
Answer: D
Microsoft examen 070-291 070-291 examen 070-291 examen
NO.7 131.107.11.0/24
NO.8 131.107.12.0/23
没有评论:
发表评论