Vous allez choisir Pass4Test après essayer une partie de Q&A EMC E20-690 (gratuit à télécharger). Le guide d'étude produit par Pass4Test est une assurance 100% à vous aider à réussir le test Certification EMC E20-690.
Pass4Test est un site d'offrir l'outil de formation convenable pour les candidats de test Certification IT. Le produit de Pass4Test peut aider les candidats à économiser les temps et les efforts. L'outil de formation est bien proche que test réel. Vous allez réussir le test 100% avec l'aide de test simulation de Pass4Test. C'est une bonne affaire à prendre le Certificat IT en coûtant un peu d'argent. N'hésitez plus d'ajouter l'outil de formation au panier.
Le programme de formation EMC E20-690 offert par Pass4Test comprend les exercices et les test simulation. Vous voyez aussi les autres sites d'offrir l'outil de formation, mais c'est pas difficile à découvrir une grand écart de la qualité entre Pass4Test et les autres fournisseurs. Celui de Pass4Test est plus complet et convenable pour la préparation dans une courte terme.
Pass4Test est un site web qui vous donne plus de chances à passer le test de Certification EMC E20-690. Le résultat de recherche sortis par les experts de Pass4Test peut assurer que ce sera vous ensuite qui réussirez le test EMC E20-690. Choisissez Pass4Test, choisissez le succès. L'outil de se former de Pass4Test est bien efficace. Parmi les gens qui ont déjà passé le test, la majorité a préparé le test avec la Q&A de Pass4Test.
Code d'Examen: E20-690
Nom d'Examen: EMC (VNX Solutions Specialist Exam for Platform Engineers)
Questions et réponses: 116 Q&As
E20-690 est un test de EMC Certification, donc réussir E20-690 est le premier pas à mettre le pied sur la Certifiction EMC. Ça peut expliquer certiainement pourquoi le test EMC E20-690 devient de plus en plus chaud, et il y a de plus en plus de gens qui veulent participer le test E20-690. Au contraire, il n'y a que pas beaucoup de gens qui pourrait réussir ce test. Dans ce cas, si vous vous réfléchissez étudier avec une bonne Q&A?
E20-690 Démo gratuit à télécharger: http://www.pass4test.fr/E20-690.html
NO.1 What IP address is assigned to the eth2 interface on a Control Station?
A. IP address for the B management network
B. IP address for the A management network
C. Public IP address for the customer's network
D. IP address for the peer Control Station
Answer: A
EMC certification E20-690 E20-690 examen
NO.2 A customer asks your help in determining which types of DPE and disk drives are supported in a VNX
storage system. How would you respond?
A. 2U DPE with either fifteen 2.5 ± SAS o r t w en t -five 3.5" EFD disk drives
B. 3U DPE with either fifteen 3.5 ± EFD , SAS o r t w en t -five 2.5" SAS disk drives
C. 4U DPE with either fifteen 3.5 ± FC , EFD o r t w en t -five .2.5" SAS disk drives
D. 3U DPE with either fifteen 2.5 ± EFD , FC o r t w en t -five 2.5 ± EFD d i sk d ri ves
Answer: B
certification EMC E20-690 E20-690 examen E20-690 examen E20-690 examen E20-690
NO.3 Refer to the exhibit.
Which DAE and components does cable 2 connect?
A. SP A slot 0 port 0 to the SAS expander on DAE 1 LCC A
B. SP B slot 0 port 1 to the SAS expander on DAE 0 LCC B
C. SP B slot 0 port 0 to the SAS expander on DAE 1 LCC B
D. SP A slot 0 port 1 to the SAS expander on DAE 0 LCC A
Answer: B
EMC E20-690 E20-690 examen
NO.4 Refer to the exhibit.
Which component is located in location 3?
A. CS 1
B. CS 0
C. DAE 0
D. DAE 1
Answer: A
EMC E20-690 E20-690 examen certification E20-690
NO.5 What IP address is assigned to the eth3 interface on a Control Station?
A. IP address for the A management network
B. IP address for the B management network
C. Public IP address for the customer's network
D. IP address for the peer Control Station
Answer: C
EMC examen certification E20-690 E20-690 examen certification E20-690
NO.6 Which VNX enclosures use a common motherboard architecture?
A. DME and SPE
B. DPE and SPE
C. DPE and 25-drive DAE
D. Control Station and DME
Answer: A
EMC examen E20-690 E20-690 examen
NO.7 What protocols does the Data Mover support.?
A. CIFS, NFS, pNFS and MPFS
B. CIFS, pNFS, and SCSI
C. MPFS, HTTP, FTP, and NFS
D. NFS, FC, and CIFS
Answer: A
EMC examen E20-690 certification E20-690 E20-690 E20-690
NO.8 Which resource is required for all VNX activities performed by EMC and Partner personnel?
A. Simple VNX Support Matrix
B. Host Connectivity Guide
C. VNX Procedure Generator
D. Interoperability Matrices
Answer: C
EMC examen E20-690 E20-690
NO.9 Where can you find the widest range of resources for VNX-related information?
A. VNX Family Product Page
B. Support by Product
C. Partners Web Page
D. IP Storage Handbook
Answer: A
certification EMC E20-690 examen E20-690 examen certification E20-690 certification E20-690 E20-690 examen
NO.10 Refer to the exhibit.
Which DAE and components does cable 1 connect?
A. SP A slot 0 port 1 to the SAS expander on DAE 0 LCC A
B. SP A slot 0 port 0 to the SAS expander on DAE 1 LCC A
C. SP B slot 0 port 0 to the SAS expander on DAE 1 LCC B
D. SP B slot 0 port 1 to the SAS expander on DAE 0 LCC B
Answer: A
EMC E20-690 examen certification E20-690 E20-690
NO.11 Which kind of back-end bus connectivity is supported on a VNX storage system?
A. 4 lane 6 Gb/s SAS
B. 4 lane 6 Gb/s FC
C. 2 lane 6 Gb/s SAS
D. 2 lane 6 Gb/s FC
Answer: A
EMC examen E20-690 E20-690 examen E20-690 examen
NO.12 A new VNX Unified system has been installed. The engineer would like to verify that the hosts are
running a supported operating system and EMC PowerPath software version. What resource should be
used?
A. VNX Simple Support Matrix
B. VNX Procedure Generator
C. VNX Installation Toolkit
D. VNX Product Support Bulletins
Answer: A
certification EMC E20-690 examen certification E20-690 E20-690 E20-690
NO.13 How are SAS bus hardware IDs configured for the VNX enclosures?
A. Automatically assigned during system boot process
B. Assigned by the address switch located on each enclosure
C. Assigned by Unisphere Service Manager
D. Assigned by the Backend Bus Reset Wizard in Unisphere
Answer: A
EMC E20-690 E20-690 E20-690 examen E20-690
NO.14 What are the minimum components required to configure a VNX5500 for Block storage system?
A. Control Station, SP, DAE
B. Control Station, SP, DME
C. SP, DME, DAE
D. SPS, SPE, DAE
Answer: D
EMC E20-690 certification E20-690 E20-690
NO.15 Refer to the exhibit.
Where is DM 3 located?
A. Location 6
B. Location 5
C. Location 7
D. Location 10
Answer: A
EMC E20-690 E20-690 E20-690 E20-690
Pass4Test peut offrir la facilité aux candidats qui préparent le test EMC E20-690. Nombreux de candidats choisissent le Pass4Test à préparer le test et réussir finalement à la première fois. Les experts de Pass4Test sont expérimentés et spécialistes. Ils profitent leurs expériences riches et connaissances professionnelles à rechercher la Q&A EMC E20-690 selon le résumé de test réel EMC E20-690. Vous pouvez réussir le test à la première fois sans aucune doute.
没有评论:
发表评论