Le plus récent matériel de formation examen Network Appliance NS0-502 de certification

Pass4Test peut vous fournir un raccourci à passer le test Network Appliance NS0-502: moins de temps et efforts dépensés. Vous trouverez les bonnes documentations de se former dans le site Pass4Test qui peut vous aider efficacement à réussir le test Network Appliance NS0-502. Si vous voyez les documentations dans les autres sites, c'est pas difficile à trouver qu''elles sont venues de Pass4Test, parce que lesquelles dans Pass4Test sont le plus complété et la mise à jour plus vite.

Le test certification Network Appliance NS0-502 est une bonne preuve de connaissances professionnelles et la techniques. Dans l'Industrie IT, beaucoiup de humains ressource font l'accent de lesquels certificats que les volontiers obtiennent. C'est clairement que le certificat Network Appliance NS0-502 puisse augmenter la compétition dans ce marché.

Code d'Examen: NS0-502
Nom d'Examen: Network Appliance (NetApp Certified Implementation Engineer-SAN and Virtualization)
Questions et réponses: 106 Q&As

Pass4Test est un site qui peut réalise le rêve de beaucoup de professionnels. Pass4Test peut vous donner un coup de main pour réussir le test Certification Network Appliance NS0-502 via son guide d'étude. Est-ce que vous vous souciez de test Certification Network Appliance NS0-502? Est-ce que vous êtes en cours de penser à chercher quelques Q&As à vous aider? Pass4Test peut résoudre ces problèmes. Les documentations offertes par Pass4Test peuvent vous provider une préparation avant le test plus efficace. Le test de simulation de Pass4Test est presque le même que le test réel. Étudier avec le guide d'étude de Pass4Test, vous pouvez passer le test avec une haute note.

Les produits de Pass4Test a une bonne qualité, et la fréquence de la mise à jour est bien impressionnée. Si vous avez déjà choisi la Q&A de Pass4Test, vous n'aurez pas le problème à réussir le test Network Appliance NS0-502.

Dans ce monde d'informatique, l'industrie IT est suivi par de plus en plus de ges. Dans ce domaine demandant beaucoup de techniques, il faut des Certificat à se preuver les techniques professionnelle. Les Certificats IT sont improtant pour un interviewé pendant un entretien. C'est pas facile à passer le test Network Appliance NS0-502, donc c'est pourquoi beaucoup de professionnels qui choisissent ce Certificat pour se preuver.

Est-ce que vous vous souciez encore pour passer le test Network Appliance NS0-502? Pourquoi pas choisir la formation en Internet dans une société de l'informatique. Un bon choix de l'outil formation peut résoudre le problème de prendre grande quantité de connaissances demandées par le test Network Appliance NS0-502, et vous permet de préparer mieux avant le test. Les experts de Pass4Test travaillent avec tous efforts à produire une bonne Q&A ciblée au test Network Appliance NS0-502. La Q&A est un bon choix pour vous. Vous pouvez télécharger le démo grantuit tout d'abord en Internet.

Le test Certification Network Appliance NS0-502 est une chance précieuse à augmenter vos connaissances de technologie informatique dans l'industrie IT. Il attire beaucoup de professionls à participer ce test. Pass4Test peut vous offrir les outils de formation particuliers à propos de test Network Appliance NS0-502. Vous réaliserez plus tôt votre rêve avec la Q&A écrite par l'équipe professionnelle de Pass4Test. Pass4Test se contribue à vous donner un coup de main pour réussir le test Network Appliance NS0-502.

NS0-502 Démo gratuit à télécharger: http://www.pass4test.fr/NS0-502.html

NO.1 Click the Exhibit button.
Based on the diagram shown, what is the appropriate FC switch topology?
A. full mesh
B. core-edge
C. full cascade
D. partial mesh
Answer: B

certification Network Appliance   NS0-502   NS0-502   NS0-502 examen

NO.2 What are three relevant perfstat counters to check for unaligned I/O that do not fall on the WAFL
boundary? (Choose three.)
A. wp.partial_write
B. vvol_read.io_valid
C. read/write_align_histo.XX
D. read/write_partial_blocks.XX
E. xinode content misses
Answer: ACD

Network Appliance   NS0-502   NS0-502   NS0-502   NS0-502

NO.3 A 100-GB thinly provisioned LUN is allocated to a Windows host. 100 GB of data is written into the
LUN. The current capacity utilization on the disk array as well as the host is 100%. 50 GB of data is
deleted from the LUN. Space reclaimer has NOT been run.
What is the current capacity utilization on both the host and the disk array?
A. 50% on the host, 100% on the disk array
B. 100% on the host, 50% on the disk array
C. 50% on the host, 50% on the disk array
D. 100% on the host, 100% on the disk array
Answer: A

Network Appliance   certification NS0-502   NS0-502 examen

NO.4 A 200-GB LUN is created in an empty 500-GB volume with the volume guarantee option set to Volume.
LUN reservation is enabled and the fractional reserve is set to 100 and scheduled snapshots are
disabled.
Directly after LUN creation, what is the maximum free space available in the volume?
A. 200 GB
B. 300 GB
C. 400 GB
D. 500 GB
Answer: B

Network Appliance   NS0-502   NS0-502 examen   NS0-502   NS0-502 examen

NO.5 Click the Exhibit Button
The table highlights the space management policy that is defined for a particular flexvol, acmevol.
Based on the information provided in the table, which action will the storage controller take when it runs
out of space in the volume?
A. It will try deleting Snapshot copies first to reclaim space before trying to grow the volume.
B. It will grow the volume before deleting Snapshot copies.
C. It will only try deleting Snapshot copies to reclaim space and will not grow the volume.
D. It is irrelevant since fractional_reserve is 0%.
Answer: C

Network Appliance   NS0-502 examen   certification NS0-502   NS0-502

NO.6 Click the Exhibit button.
Given the information provided in the diagram, what is the appropriate FC topology?
A. point-to-point
B. switched fabric
C. arbitrated loop
D. ring
Answer: B

Network Appliance   NS0-502 examen   NS0-502   certification NS0-502   NS0-502 examen

NO.7 Click the Exhibit button.
In the diagram shown, a portset is created on controller 1 with the command: controller1>portset create -f
ntapportset 0b. This portset is bound to the igroup with all the initiators in it.
How many paths can host 1 see to a LUN on controller 1?
A. six paths
B. four paths
C. eight paths
D. two paths
Answer: D

Network Appliance   NS0-502 examen   NS0-502   NS0-502 examen

NO.8 What would you use to share a data LUN among multiple servers where each server has simultaneous
write access?
A. host-based BootBIOS
B. host-based multipathing
C. host-based volume manager
D. host-based clustered file system
Answer: D

Network Appliance   NS0-502   certification NS0-502   certification NS0-502

NO.9 Which utility on Solaris 10 can be used to collect information about firmware and driver versions for a
Qlogic QLAxxx/QLExxxx HBA?
A. EMutil
B. SANutil
C. cfgadmin
D. SANsurfer
E. HBAnywhere
Answer: D

Network Appliance   NS0-502   NS0-502 examen   NS0-502   NS0-502 examen

NO.10 An organization currently has a NetApp Fibre Channel block-based solution. With limited budget and
resources, they want to create a new disaster recovery site that utilizes a NetApp solution.
What would the optimal solution include?
A. SnapMover and Fibre Channel at the disaster recovery site for all hosts
B. SnapMirror and iSCSI at the disaster recovery site for all hosts
C. Fibre Channel at both locations using ftp to replicate storage
D. MetroCluster and NAS
Answer: B

certification Network Appliance   NS0-502 examen   certification NS0-502   NS0-502 examen

NO.11 Which utility on Windows 2003 and Windows 2008 can be used to collect information about firmware
and driver versions for an Emulex LP1xxxx/LPe1xxx HBA?
A. EMutil
B. SANutil
C. fcp config
D. SANsurfer
E. HBAnywhere
Answer: E

Network Appliance   NS0-502   NS0-502   NS0-502 examen

NO.12 Which utility on Solaris 10 can be used to collect information about firmware and driver versions for an
Emulex LP1xxxx/LPe1xxxx HBA?
A. EMutil
B. SANutil
C. hbainfo
D. SANsurfer
E. HBAnywhere
Answer: E

Network Appliance   NS0-502   NS0-502   NS0-502   NS0-502 examen

NO.13 Which FC SAN topology provides the best performance and scalability?
A. cascade
B. core-edge
C. full mesh
D. partial mesh
Answer: B

Network Appliance examen   NS0-502 examen   certification NS0-502   NS0-502 examen   NS0-502   NS0-502

NO.14 Which three protocols can be used for communications between a host running SnapDrive for
Windows and the NetApp Storage Controllers? (Choose three.)
A. http:
B. https:
C. ftp:
D. RPC
E. ssh
Answer: ABD

certification Network Appliance   NS0-502   certification NS0-502   NS0-502 examen

NO.15 Zoning by World Wide Port Name (WWPN) is deployed and a host HBA is replaced.
Which zone change needs to be made?
A. No changes are necessary.
B. The zone configuration should be changed to include the port to which the HBA is connected.
C. The zone configuration should be changed to include the WWPN of the new HBA; the old WWPN will
be automatically dropped.
D. The zone configuration should be changed to include the WWPN of the new HBA and to remove the
WWPN of the old HBA.
Answer: D

certification Network Appliance   NS0-502   NS0-502 examen

NO.16 Click the Exhibit button.
You see the following error on the storage controller's console or messages file.
What is the most likely cause for this error?
A. portal group misconfiguration
B. iSCSI CHAP misconfiguration
C. iSNS misconfiguration
D. IPsec misconfiguration
Answer: B

Network Appliance   NS0-502   NS0-502 examen   NS0-502

NO.17 A company has a Fibre Channel environment and wants to connect a new host in a remote data
center using 50/125um OM2 multi-mode fiber cable and needs to support 2 Gb speeds.
What is the maximum distance of the cable run supported in this situation?
A. 50/125um OM2 multi-mode fiber cable supports up to 500 meters at 2 Gb.
B. 50/125um OM2 multi-mode fiber cable supports up to 10000 meters at 2 Gb.
C. 50/125um OM2 multi-mode fiber cable supports up to 150 meters at 2 Gb.
D. 50/125um OM2 multi-mode fiber cable supports up to 300 meters at 2 Gb.
Answer: D

certification Network Appliance   NS0-502   NS0-502   NS0-502   NS0-502 examen

NO.18 A customer has a four-node SUN cluster configuration. Each node has two, dual-ported HBAs.
What is the minimum number of igroups that need to be created to map a LUN to the cluster?
A. 1
B. 2
C. 4
D. 8
Answer: A

Network Appliance examen   NS0-502 examen   NS0-502

NO.19 Click the Exhibit button.
Based on the diagram shown, what is the appropriate FC switch topology?
A. core-edge
B. full mesh
C. partial mesh
D. partial cascade
Answer: C

Network Appliance   NS0-502 examen   certification NS0-502   certification NS0-502

NO.20 Any newly installed system with Data ONTAP 7.3.1 supports which cfmode?
A. dual_fabric only
B. single_image
C. partner
D. mixed
Answer: B

Network Appliance   NS0-502   NS0-502   NS0-502   NS0-502   NS0-502 examen

Pass4Test possède une grande équipe composée des experts IT qui travaillent dur avec leurs riches expériences et connaissances pour produire un bon outil de formation. Selon les anciens test, le test simulation de Pass4Test est bien lié avec le test réel. Pass4Test peut vous assurer à réussir le test. Maintenant vous ajoutez votre outil de formation au panier, et votre rêve réalisera bien tôt.

NS0-502 dernières questions d'examen certification Network Appliance et réponses publiés

Pass4Test est un site à offrir les Q&As de tout les tests Certification IT. Chez Pass4Test, vous pouvez trouvez de meilleurs matériaux. Nos guides d'étude vous permettent de réussir le test Certification Network Appliance NS0-502 sans aucune doute, sinon nous allons rendre votre argent d'acheter la Q&A et la mettre à jour tout de suite, en fait, c'est une situation très rare. Bien que il existe plusieurs façons à améliorer votre concurrence de carrière, Pass4Test est lequel plus efficace : Moins d'argent et moins de temps dépensés, plus sûr à passer le test Certification. De plus, un an de service après vendre est gratuit pour vous.

Beaucoup de travailleurs dans l'Industrie IT peut obenir un meilleur travail et améliorer son niveau de vie à travers le Certificat Network Appliance NS0-502. Mais la majorité des candidats dépensent beaucoup de temps et d'argent pour préparer le test, ça ne coûte pas dans cette société que le temps est tellement précieux. Pass4Test peut vous aider à économiser le temps et l'effort pendant le cours de la préparation du test Network Appliance NS0-502. Choisir le produit de Pass4Test particulier pour le test Certification Network Appliance NS0-502 vous permet à réussir 100% le test. Votre argent sera tout rendu si malheureusement vous ne passez pas le test.

Code d'Examen: NS0-502
Nom d'Examen: Network Appliance (NetApp Certified Implementation Engineer-SAN and Virtualization)
Questions et réponses: 106 Q&As

Pass4Test peut non seulement vous aider à réussir votre rêve, mais encore vous offre le service gratuit pendand un an après vendre en ligne. Q&A offerte par l'équipe de Pass4Test vous assure à passer 100% le test de Certification Network Appliance NS0-502.

Vous pouvez trouver un meilleur boulot dans l'industrie IT à travers d'obtenir le test Network Appliance NS0-502, la voie à la réussite de votre professionnel sera ouverte pour vous.

NS0-502 Démo gratuit à télécharger: http://www.pass4test.fr/NS0-502.html

NO.1 What would you use to share a data LUN among multiple servers where each server has simultaneous
write access?
A. host-based BootBIOS
B. host-based multipathing
C. host-based volume manager
D. host-based clustered file system
Answer: D

certification Network Appliance   NS0-502   NS0-502 examen   NS0-502

NO.2 Click the Exhibit button.
You see the following error on the storage controller's console or messages file.
What is the most likely cause for this error?
A. portal group misconfiguration
B. iSCSI CHAP misconfiguration
C. iSNS misconfiguration
D. IPsec misconfiguration
Answer: B

Network Appliance   certification NS0-502   NS0-502   NS0-502   NS0-502

NO.3 Zoning by World Wide Port Name (WWPN) is deployed and a host HBA is replaced.
Which zone change needs to be made?
A. No changes are necessary.
B. The zone configuration should be changed to include the port to which the HBA is connected.
C. The zone configuration should be changed to include the WWPN of the new HBA; the old WWPN will
be automatically dropped.
D. The zone configuration should be changed to include the WWPN of the new HBA and to remove the
WWPN of the old HBA.
Answer: D

Network Appliance   NS0-502   NS0-502

NO.4 Click the Exhibit Button
The table highlights the space management policy that is defined for a particular flexvol, acmevol.
Based on the information provided in the table, which action will the storage controller take when it runs
out of space in the volume?
A. It will try deleting Snapshot copies first to reclaim space before trying to grow the volume.
B. It will grow the volume before deleting Snapshot copies.
C. It will only try deleting Snapshot copies to reclaim space and will not grow the volume.
D. It is irrelevant since fractional_reserve is 0%.
Answer: C

Network Appliance   certification NS0-502   NS0-502 examen   NS0-502

NO.5 A 100-GB thinly provisioned LUN is allocated to a Windows host. 100 GB of data is written into the
LUN. The current capacity utilization on the disk array as well as the host is 100%. 50 GB of data is
deleted from the LUN. Space reclaimer has NOT been run.
What is the current capacity utilization on both the host and the disk array?
A. 50% on the host, 100% on the disk array
B. 100% on the host, 50% on the disk array
C. 50% on the host, 50% on the disk array
D. 100% on the host, 100% on the disk array
Answer: A

certification Network Appliance   NS0-502   NS0-502

NO.6 What are three relevant perfstat counters to check for unaligned I/O that do not fall on the WAFL
boundary? (Choose three.)
A. wp.partial_write
B. vvol_read.io_valid
C. read/write_align_histo.XX
D. read/write_partial_blocks.XX
E. xinode content misses
Answer: ACD

certification Network Appliance   certification NS0-502   NS0-502   NS0-502   NS0-502 examen

NO.7 Click the Exhibit button.
Based on the diagram shown, what is the appropriate FC switch topology?
A. core-edge
B. full mesh
C. partial mesh
D. partial cascade
Answer: C

certification Network Appliance   certification NS0-502   NS0-502   certification NS0-502

NO.8 A company has a Fibre Channel environment and wants to connect a new host in a remote data
center using 50/125um OM2 multi-mode fiber cable and needs to support 2 Gb speeds.
What is the maximum distance of the cable run supported in this situation?
A. 50/125um OM2 multi-mode fiber cable supports up to 500 meters at 2 Gb.
B. 50/125um OM2 multi-mode fiber cable supports up to 10000 meters at 2 Gb.
C. 50/125um OM2 multi-mode fiber cable supports up to 150 meters at 2 Gb.
D. 50/125um OM2 multi-mode fiber cable supports up to 300 meters at 2 Gb.
Answer: D

Network Appliance   NS0-502   NS0-502 examen   NS0-502

NO.9 Click the Exhibit button.
In the diagram shown, a portset is created on controller 1 with the command: controller1>portset create -f
ntapportset 0b. This portset is bound to the igroup with all the initiators in it.
How many paths can host 1 see to a LUN on controller 1?
A. six paths
B. four paths
C. eight paths
D. two paths
Answer: D

certification Network Appliance   NS0-502   NS0-502   NS0-502 examen

NO.10 Which FC SAN topology provides the best performance and scalability?
A. cascade
B. core-edge
C. full mesh
D. partial mesh
Answer: B

Network Appliance examen   NS0-502 examen   certification NS0-502

NO.11 An organization currently has a NetApp Fibre Channel block-based solution. With limited budget and
resources, they want to create a new disaster recovery site that utilizes a NetApp solution.
What would the optimal solution include?
A. SnapMover and Fibre Channel at the disaster recovery site for all hosts
B. SnapMirror and iSCSI at the disaster recovery site for all hosts
C. Fibre Channel at both locations using ftp to replicate storage
D. MetroCluster and NAS
Answer: B

Network Appliance   NS0-502   certification NS0-502   NS0-502 examen   NS0-502

NO.12 Click the Exhibit button.
Given the information provided in the diagram, what is the appropriate FC topology?
A. point-to-point
B. switched fabric
C. arbitrated loop
D. ring
Answer: B

Network Appliance   NS0-502   NS0-502   certification NS0-502   NS0-502 examen

NO.13 A 200-GB LUN is created in an empty 500-GB volume with the volume guarantee option set to Volume.
LUN reservation is enabled and the fractional reserve is set to 100 and scheduled snapshots are
disabled.
Directly after LUN creation, what is the maximum free space available in the volume?
A. 200 GB
B. 300 GB
C. 400 GB
D. 500 GB
Answer: B

Network Appliance   NS0-502 examen   NS0-502 examen   NS0-502

NO.14 Which three protocols can be used for communications between a host running SnapDrive for
Windows and the NetApp Storage Controllers? (Choose three.)
A. http:
B. https:
C. ftp:
D. RPC
E. ssh
Answer: ABD

Network Appliance   NS0-502   NS0-502   NS0-502   certification NS0-502

NO.15 Which utility on Solaris 10 can be used to collect information about firmware and driver versions for a
Qlogic QLAxxx/QLExxxx HBA?
A. EMutil
B. SANutil
C. cfgadmin
D. SANsurfer
E. HBAnywhere
Answer: D

Network Appliance   NS0-502   NS0-502   certification NS0-502   NS0-502

NO.16 A customer has a four-node SUN cluster configuration. Each node has two, dual-ported HBAs.
What is the minimum number of igroups that need to be created to map a LUN to the cluster?
A. 1
B. 2
C. 4
D. 8
Answer: A

Network Appliance   certification NS0-502   NS0-502   NS0-502 examen   NS0-502

NO.17 Click the Exhibit button.
Based on the diagram shown, what is the appropriate FC switch topology?
A. full mesh
B. core-edge
C. full cascade
D. partial mesh
Answer: B

Network Appliance examen   NS0-502   NS0-502 examen   NS0-502

NO.18 Which utility on Solaris 10 can be used to collect information about firmware and driver versions for an
Emulex LP1xxxx/LPe1xxxx HBA?
A. EMutil
B. SANutil
C. hbainfo
D. SANsurfer
E. HBAnywhere
Answer: E

certification Network Appliance   certification NS0-502   NS0-502   NS0-502 examen

NO.19 Which utility on Windows 2003 and Windows 2008 can be used to collect information about firmware
and driver versions for an Emulex LP1xxxx/LPe1xxx HBA?
A. EMutil
B. SANutil
C. fcp config
D. SANsurfer
E. HBAnywhere
Answer: E

certification Network Appliance   NS0-502   certification NS0-502   NS0-502

NO.20 Any newly installed system with Data ONTAP 7.3.1 supports which cfmode?
A. dual_fabric only
B. single_image
C. partner
D. mixed
Answer: B

Network Appliance examen   NS0-502   NS0-502   NS0-502

Pass4Test est un site particulier d'offrir la formation à propos de test Certification IT. C'est un bon choix pour vous aider à réussir le test Network Appliance NS0-502. Pass4Test offre toutes les informations et les documentations plus nouvelles qui peut vous donner plus de chances à réussir le test.

Guide de formation plus récente de Network Appliance NS0-154 NS0-502 NS0-510 NS0-501 NS0-163 NS0-120

Pass4Test est un site particulier d'offrir la formation à propos de test Certification IT. C'est un bon choix pour vous aider à réussir le test Network Appliance NS0-154 NS0-502 NS0-510 NS0-501 NS0-163 NS0-120. Pass4Test offre toutes les informations et les documentations plus nouvelles qui peut vous donner plus de chances à réussir le test.

Quand vous hésitez même à choisir Pass4Test, le démo gratuit dans le site Pass4Test est disponible pour vous à essayer avant d'acheter. Nos démos vous feront confiant à choisir Pass4Test. Pass4Test est votre meilleur choix à passer l'examen de Certification Network Appliance NS0-154 NS0-502 NS0-510 NS0-501 NS0-163 NS0-120, et aussi une meilleure assurance du succès du test NS0-154 NS0-502 NS0-510 NS0-501 NS0-163 NS0-120. Vous choisissez Pass4Test, vous choisissez le succès.

Code d'Examen: NS0-154
Nom d'Examen: Network Appliance (Data ONTAP 8.0 7-Mode Administrator)
Questions et réponses: 148 Q&As

Code d'Examen: NS0-502
Nom d'Examen: Network Appliance (NetApp Certified Implementation Engineer-SAN and Virtualization)
Questions et réponses: 106 Q&As

Code d'Examen: NS0-510
Nom d'Examen: Network Appliance (NCIE - Backup and Recovery Implementation Engineer Exam)
Questions et réponses: 216 Q&As

Code d'Examen: NS0-501
Nom d'Examen: Network Appliance (Network Appliance Implementation Engineer-SAN)
Questions et réponses: 100 Q&As

Code d'Examen: NS0-163
Nom d'Examen: Network Appliance (Network Appliance Data Protection Solutions)
Questions et réponses: 154 Q&As

Code d'Examen: NS0-120
Nom d'Examen: Network Appliance (Data ONTAP Advanced Exam)
Questions et réponses: 77 Q&As

Pass4Test est un site professionnel qui répondre les demandes de beaucoup clients. Les candidats qui ont déjà passer leurs premiers test Certification IT ont devenus les suivis de Pass4Test. Grâce à la bonne qualité des documentations, Pass4Test peut aider tous candidats à réussir le test Network Appliance NS0-154 NS0-502 NS0-510 NS0-501 NS0-163 NS0-120.

Si vous voulez se prouver une compétition et s'enraciner le statut dans l'industrie IT à travers de test Certification Network Appliance NS0-154 NS0-502 NS0-510 NS0-501 NS0-163 NS0-120, c'est obligatoire que vous devez avior les connaissances professionnelles. Mais il demande pas mal de travaux à passer le test Certification Network Appliance NS0-154 NS0-502 NS0-510 NS0-501 NS0-163 NS0-120. Peut-être d'obtenir le Certificat Network Appliance NS0-154 NS0-502 NS0-510 NS0-501 NS0-163 NS0-120 peut promouvoir le tremplin vers l'Industrie IT, mais vous n'avez pas besoin de travailler autant dur à préparer le test. Vous avez un autre choix à faire toutes les choses plus facile : prendre le produit de Pass4Test comme vos matériaux avec qui vous vous pratiquez avant le test réel. La Q&A de Pass4Test est recherchée particulièrement pour le test IT.

NS0-154 Démo gratuit à télécharger: http://www.pass4test.fr/NS0-154.html

NO.1 Which set of protocols provide block-level access to NetApp storage?
A.CIFS and NFS
B.HTTP and FTP
C. iSCSI and FCP
D.SNA and RPC
Answer: C

Network Appliance   NS0-154   NS0-154   certification NS0-154   NS0-154

NO.2 Which changes the NDMP password on the Open System SnapVault agent?
A.password
B.password
C.svpasswd
D.svpassword
Answer: D

Network Appliance examen   NS0-154 examen   NS0-154   NS0-154   NS0-154   NS0-154

NO.3 Which two commands can be used to enable LUN reservations? (Choose two.)
A.lun create
B.lun map
C.lun reservation set
D.lun set reservation
Answer: AD

Network Appliance   NS0-154 examen   NS0-154   certification NS0-154

NO.4 If the security style is set to UNIX, CIFS client file access is determined by ___________ .
A.NT ACLs
B.the last client to set permissions
C.the mapped UNIX UID/GID of the CIFS client and the UNIX file permissions
D.This is not allowed: A CIFS client cannot access files in a path set to a security style of UNIX
Answer: C

Network Appliance examen   NS0-154 examen   NS0-154   NS0-154   NS0-154

NO.5 What utility on the storage system will allow you to capture network packet information?
A.netstats
B.pktt
C.snoop
D.traceroute
Answer: B

certification Network Appliance   NS0-154 examen   NS0-154   certification NS0-154

NO.6 For automatic user name mapping to occur for a CIFS and UNIX user name that are the same, you
must do what?
A.Enter the CIFS user in the NIS database.
B.Enter the user names in the /etc/hosts.equiv file.
C.Use both a NIS server and a Domain Controller in the network.
D.Nothing: mapping will occur if user name authentication is available.
Answer: D

certification Network Appliance   NS0-154 examen   NS0-154   NS0-154

NO.7 Which two will allow you to read and analyze a packet trace file generated by the storage system?
(Choose two.)
A.Eternal View
B.Netmon
C.pktt
D.WireShark
Answer: BD

certification Network Appliance   certification NS0-154   NS0-154   certification NS0-154

NO.8 Host multi-pathing describes a _________ solution that has at least two distinct _________ paths to a
LUN.
A.FC or IP SAN, physical
B.FC or IP SAN, virtual
C.FC SAN, virtual
D.token ring, physical
Answer: A

Network Appliance examen   certification NS0-154   NS0-154 examen   NS0-154

NO.9 Which three licenses are required for fabric-attached MetroCluster? (Choose three.)
A.Cluster
B.Cluster_remote
C.Syncmirror_local
D.Syncmirror_fabric
E.Syncmirror_remote
Answer: ABC

Network Appliance   NS0-154 examen   NS0-154   NS0-154   NS0-154

NO.10 Which three protocols can coexist on a NetApp storage system? (Choose three.)
A.CIFS
B.DAFS
C.DFS
D.FCP
E.NFS
Answer: ADE

certification Network Appliance   certification NS0-154   NS0-154 examen

NO.11 An iSCSI or FC SAN implementation provides _____ access to LUNs.
A.block
B.file
C.VIIP
D.VLD
Answer: A

certification Network Appliance   NS0-154   NS0-154   NS0-154 examen

NO.12 Which are three characteristics of an iSCSI or FCP SAN implementation? (Choose three.)
A.A LUN can be converted into a VLD.
B.LUNs can be accessed using the FCP protocol.
C.LUNs can be accessed using the iSCSI protocol.
D.Block services are associated with an iSCSI or FCP SAN environment.
Answer: BCD

Network Appliance   NS0-154 examen   certification NS0-154   NS0-154   NS0-154 examen

NO.13 To configure a storage system as a member of a Windows active directory domain, the time on the
storage system must be set to be within plus or minus five minutes of the time on the domain controller.
A.True
B.False
Answer: A

certification Network Appliance   NS0-154 examen   NS0-154   NS0-154

NO.14 To determine the version of Data ONTAP in which a bug has been fixed, use the NOW site _______
utility. (Choose two.)
A.AutoSupport
B.Bugs Online
C.NetApp Diagnostics
D.Release Comparison
E.System Configuration Guide
Answer: BD

Network Appliance   NS0-154   NS0-154   NS0-154 examen   NS0-154

NO.15 In a tape environment after a SnapRestore reversion of a volume, incremental backup and restore
operations on the file or volume cannot rely on the timestamps to determine what data needs to be
backed up or restored. Which course of action ensures correct incremental backups?
A.Perform a base-level backup of the volume after you restore it.
B.Reboot the storage system to reset timestamps back to their original times before the reversion.
C.Take a new snapshot of the volume to create new base-level timestamps for the incremental backup.
D.Take a new snapshot of the volume to create new base-level timestamps for the incremental backup,
and then perform a base-level backup of the volume after you restore it.
Answer: A

Network Appliance   certification NS0-154   NS0-154

NO.16 Which three /etc/snapmirror.conf entries will support synchronous or semi-synchronous SnapMirror?
(Choose three.)
A.FilerA:source_vol FilerB:destination_vol - sync
B.FilerA:source_vol FilerB:destination_vol - 0-55/5 * * *
C.FilerA:source_vol FilerB:destination_vol outstanding=3s sync
D.FilerA:source_vol FilerB:destination_vol visibility_interval=1hr, outstanding=3ms, cksum=crc32 sync
Answer: ACD

Network Appliance   NS0-154 examen   NS0-154 examen   NS0-154   certification NS0-154

NO.17 NTFS allows file access based on ___________.
A.NT ACLs and SID.
B.NT ACLs and UNIX permissions.
C.SID and password.
D.UNIX permissions.
Answer: A

Network Appliance examen   NS0-154 examen   NS0-154   NS0-154 examen   NS0-154

NO.18 Which two commands on the storage system allow you to gather detailed statistics about network
interfaces, including basic information about network connections? (Choose two.)
A.ifstat -a
B.netdiag -n
C.netstat -i
D.sysstat 1
Answer: AC

Network Appliance   certification NS0-154   NS0-154   NS0-154   NS0-154

NO.19 Which three items are NFS resources for export? (Choose three.)
A.aggregate
B.directory/qtree
C.file
D.subnet
E.volume
Answer: BCE

certification Network Appliance   certification NS0-154   NS0-154 examen   certification NS0-154

NO.20 Data ONTAP 8.0 7-Mode supports SMB 2.0 in Windows Vista and Windows Server 2008.
A.True
B.False
Answer: B

Network Appliance examen   NS0-154 examen   NS0-154   certification NS0-154   NS0-154 examen

Dernières Network Appliance NS0-502 de la pratique de l'examen questions et réponses téléchargement gratuit

Les produits de Pass4Test sont recherchés par les experts de Pass4Test qui se profitent de leurs connaissances et leurs expériences dans l'Idustrie IT. Si vous allez participer le test Network Appliance NS0-502, vous devez choisir Pass4Test. La Q&A de Pass4Test peut vous aider à préparer mieux le test Network Appliance NS0-502 avec sa grande couiverture des questions. En face d'un test très difficile, vous pouvez obtenir le Certificat Network Appliance NS0-502 sans aucune doute.

Le test Network Appliance NS0-502 est bien populaire dans l'Industrie IT. Mais ça coûte beaucoup de temps pour bien préparer le test. Le temps est certainemetn la fortune dans cette société. L'outil de formation offert par Pass4Test ne vous demande que 20 heures pour renforcer les connaissances essentales pour le test Network Appliance NS0-502. Vous aurez une meilleure préparation bien que ce soit la première fois à participer le test.

Code d'Examen: NS0-502
Nom d'Examen: Network Appliance (NetApp Certified Implementation Engineer-SAN and Virtualization)
Questions et réponses: 106 Q&As

Pass4Test, où vous pouvez trouver les conseils et les documentations de test Certification Network Appliance NS0-502, est un siteweb remarquable offrant les données à préparer le test IT. Les documentations partiels et les mis en nouveau sont offerts gratuitement dans le site de Pass4Test. D'ailleurs, nos experts profitent de leurs expériences et leurs efforts à lancer sans arrêts les Q&A plus proches au test réel. Vous allez passer votre examen plus facile.

C'est sûr que le Certificat Network Appliance NS0-502 puisse améliorer le lendemain de votre carrière. Parce que si vous pouvez passer le test Network Appliance NS0-502, c'est une meilleure preuve de vos connaissances professionnelles et de votre bonne capacité à être qualifié d'un bon boulot. Le Certificat Network Appliance NS0-502 peut bien tester la professionnalité de IT.

NS0-502 Démo gratuit à télécharger: http://www.pass4test.fr/NS0-502.html

NO.1 Click the Exhibit button.
Based on the diagram shown, what is the appropriate FC switch topology?
A. full mesh
B. core-edge
C. full cascade
D. partial mesh
Answer: B

Network Appliance   NS0-502   NS0-502 examen   certification NS0-502

NO.2 An organization currently has a NetApp Fibre Channel block-based solution. With limited budget and
resources, they want to create a new disaster recovery site that utilizes a NetApp solution.
What would the optimal solution include?
A. SnapMover and Fibre Channel at the disaster recovery site for all hosts
B. SnapMirror and iSCSI at the disaster recovery site for all hosts
C. Fibre Channel at both locations using ftp to replicate storage
D. MetroCluster and NAS
Answer: B

Network Appliance   NS0-502   NS0-502 examen   NS0-502   NS0-502 examen

NO.3 What would you use to share a data LUN among multiple servers where each server has simultaneous
write access?
A. host-based BootBIOS
B. host-based multipathing
C. host-based volume manager
D. host-based clustered file system
Answer: D

Network Appliance   NS0-502   NS0-502

NO.4 Which utility on Windows 2003 and Windows 2008 can be used to collect information about firmware
and driver versions for an Emulex LP1xxxx/LPe1xxx HBA?
A. EMutil
B. SANutil
C. fcp config
D. SANsurfer
E. HBAnywhere
Answer: E

certification Network Appliance   NS0-502   NS0-502   NS0-502

NO.5 Zoning by World Wide Port Name (WWPN) is deployed and a host HBA is replaced.
Which zone change needs to be made?
A. No changes are necessary.
B. The zone configuration should be changed to include the port to which the HBA is connected.
C. The zone configuration should be changed to include the WWPN of the new HBA; the old WWPN will
be automatically dropped.
D. The zone configuration should be changed to include the WWPN of the new HBA and to remove the
WWPN of the old HBA.
Answer: D

Network Appliance   NS0-502   NS0-502   NS0-502   NS0-502 examen

NO.6 Click the Exhibit button.
Given the information provided in the diagram, what is the appropriate FC topology?
A. point-to-point
B. switched fabric
C. arbitrated loop
D. ring
Answer: B

certification Network Appliance   NS0-502 examen   certification NS0-502   NS0-502   NS0-502 examen

NO.7 Click the Exhibit button.
You see the following error on the storage controller's console or messages file.
What is the most likely cause for this error?
A. portal group misconfiguration
B. iSCSI CHAP misconfiguration
C. iSNS misconfiguration
D. IPsec misconfiguration
Answer: B

Network Appliance   certification NS0-502   NS0-502   NS0-502 examen

NO.8 What are three relevant perfstat counters to check for unaligned I/O that do not fall on the WAFL
boundary? (Choose three.)
A. wp.partial_write
B. vvol_read.io_valid
C. read/write_align_histo.XX
D. read/write_partial_blocks.XX
E. xinode content misses
Answer: ACD

certification Network Appliance   NS0-502   NS0-502

NO.9 A customer has a four-node SUN cluster configuration. Each node has two, dual-ported HBAs.
What is the minimum number of igroups that need to be created to map a LUN to the cluster?
A. 1
B. 2
C. 4
D. 8
Answer: A

Network Appliance   NS0-502 examen   certification NS0-502

NO.10 Click the Exhibit button.
In the diagram shown, a portset is created on controller 1 with the command: controller1>portset create -f
ntapportset 0b. This portset is bound to the igroup with all the initiators in it.
How many paths can host 1 see to a LUN on controller 1?
A. six paths
B. four paths
C. eight paths
D. two paths
Answer: D

certification Network Appliance   NS0-502   NS0-502   NS0-502   NS0-502

NO.11 Which three protocols can be used for communications between a host running SnapDrive for
Windows and the NetApp Storage Controllers? (Choose three.)
A. http:
B. https:
C. ftp:
D. RPC
E. ssh
Answer: ABD

Network Appliance examen   NS0-502   certification NS0-502   NS0-502

NO.12 A 200-GB LUN is created in an empty 500-GB volume with the volume guarantee option set to Volume.
LUN reservation is enabled and the fractional reserve is set to 100 and scheduled snapshots are
disabled.
Directly after LUN creation, what is the maximum free space available in the volume?
A. 200 GB
B. 300 GB
C. 400 GB
D. 500 GB
Answer: B

certification Network Appliance   NS0-502 examen   NS0-502   NS0-502   certification NS0-502   NS0-502 examen

NO.13 Click the Exhibit Button
The table highlights the space management policy that is defined for a particular flexvol, acmevol.
Based on the information provided in the table, which action will the storage controller take when it runs
out of space in the volume?
A. It will try deleting Snapshot copies first to reclaim space before trying to grow the volume.
B. It will grow the volume before deleting Snapshot copies.
C. It will only try deleting Snapshot copies to reclaim space and will not grow the volume.
D. It is irrelevant since fractional_reserve is 0%.
Answer: C

Network Appliance   NS0-502   NS0-502 examen

NO.14 Any newly installed system with Data ONTAP 7.3.1 supports which cfmode?
A. dual_fabric only
B. single_image
C. partner
D. mixed
Answer: B

Network Appliance   NS0-502   certification NS0-502

NO.15 Which FC SAN topology provides the best performance and scalability?
A. cascade
B. core-edge
C. full mesh
D. partial mesh
Answer: B

Network Appliance examen   certification NS0-502   NS0-502   NS0-502 examen

NO.16 Click the Exhibit button.
Based on the diagram shown, what is the appropriate FC switch topology?
A. core-edge
B. full mesh
C. partial mesh
D. partial cascade
Answer: C

Network Appliance examen   certification NS0-502   NS0-502   certification NS0-502   certification NS0-502

NO.17 Which utility on Solaris 10 can be used to collect information about firmware and driver versions for an
Emulex LP1xxxx/LPe1xxxx HBA?
A. EMutil
B. SANutil
C. hbainfo
D. SANsurfer
E. HBAnywhere
Answer: E

Network Appliance examen   NS0-502   NS0-502   NS0-502

NO.18 Which utility on Solaris 10 can be used to collect information about firmware and driver versions for a
Qlogic QLAxxx/QLExxxx HBA?
A. EMutil
B. SANutil
C. cfgadmin
D. SANsurfer
E. HBAnywhere
Answer: D

Network Appliance examen   NS0-502   certification NS0-502

NO.19 A company has a Fibre Channel environment and wants to connect a new host in a remote data
center using 50/125um OM2 multi-mode fiber cable and needs to support 2 Gb speeds.
What is the maximum distance of the cable run supported in this situation?
A. 50/125um OM2 multi-mode fiber cable supports up to 500 meters at 2 Gb.
B. 50/125um OM2 multi-mode fiber cable supports up to 10000 meters at 2 Gb.
C. 50/125um OM2 multi-mode fiber cable supports up to 150 meters at 2 Gb.
D. 50/125um OM2 multi-mode fiber cable supports up to 300 meters at 2 Gb.
Answer: D

Network Appliance   NS0-502   NS0-502   certification NS0-502

NO.20 A 100-GB thinly provisioned LUN is allocated to a Windows host. 100 GB of data is written into the
LUN. The current capacity utilization on the disk array as well as the host is 100%. 50 GB of data is
deleted from the LUN. Space reclaimer has NOT been run.
What is the current capacity utilization on both the host and the disk array?
A. 50% on the host, 100% on the disk array
B. 100% on the host, 50% on the disk array
C. 50% on the host, 50% on the disk array
D. 100% on the host, 100% on the disk array
Answer: A

certification Network Appliance   NS0-502 examen   certification NS0-502   NS0-502

Pass4Test est un site particulier à offrir les guides de formation à propos de test certificat IT. La version plus nouvelle de Q&A Network Appliance NS0-502 peut répondre sûrement une grande demande des candidats. Comme tout le monde le connait, le certificat Network Appliance NS0-502 est un point important pendant l'interview dans les grandes entreprises IT. Ça peut expliquer un pourquoi ce test est si populaire. En même temps, Pass4Test est connu par tout le monde. Choisir le Pass4Test, choisir le succès. Votre argent sera tout rendu si malheureusement vous ne passe pas le test Network Appliance NS0-502.